Usually not. A waterproofing or drainage contractor does this work, because the pit and the drain that feeds it are drainage. You need an electrician for the circuit. A plumber is the right call only when the discharge has to join a pipe a plumber owns.

What a pump here is actually pumping

The shallowest mapped seasonal water table in Layton is 29.9 inches down, on ground in hydrologic group C. That is deep enough that a pump here is usually clearing storm water rather than running against a standing table, which keeps the job small: an existing pit, a pump, a check valve and a discharge that goes far enough. The trade you need is whoever installed or can inspect the drain feeding the pit, and that is a drainage contractor.

The reasoning behind that

The pit and the drain around it are digging work. The firm that puts in interior drains puts in the sump that serves them. They are one system, so one trade builds it.

The wiring is a licensed electrician’s job in most places. A sump pump wants its own circuit. A pump that shares a circuit is a pump that stops when the other thing on it trips a breaker.

A plumber comes in where the discharge meets fixed pipe. In many places a sump may not join a sewer at all. Where the rules allow it, that join is plumbing. Where they do not, the discharge is a buried line to a surface outlet, and that is drainage work again.

Whoever does it, the line has to end far enough from the house that the water does not come back. That is the detail most often got wrong.

More on this: Basement Waterproofing and Interior French Drain in Layton, UT.

Every question, in one place: Layton Utah French Drain drainage questions.

Check the Layton Utah French Drain service area to see whether your street is covered.

Back to Layton Utah French Drain.